Coatings used in packaging industry are various. Cold and hot seal coating are common. Also, cold and hot seal coatings are commonly used, as well as hot melt and wax coatings. Silicon, Pvdc coating, ant mist and many others are employed. Materials which can be coated with a certain machine depends highly on the type of coating unit(s) available, on machine's construction and equipment.
Ask more informations
- Machine Code
- LA356
- Manufacturer
- MB
- Modello
- HOT MELT, WAX COATER LAMINATOR
- Year
- 2002
- Application
- Lamination + coating
- Type of lamination/coating
- HOT MELT
- Working width (mm)
- 1700
- Materials
- Paper and board, Film and Alu foil ( secondary unwi)
- Speed
- 400 mpm
- First unwinder type
- Single position shaftless double brake for paper and board
- Max diameter reel unwinder
- 1900
- Secondary unwinder type
- Single position shaftles for film and Al foil
- Max diameter reel unwinder
- 1000
- Rewinder type
- Surface driven shaftless
- Max diameter reel rewinder
- 1900
- Coating unit
- Trolley based with Wax - Hot melt trolley and Semi flexo trolley
- Second Coating unitr
- Gravure for Primer coating
- Drying
- 3 meter tunnel with one blowing and one exhaus fan and one gas burner for lamination unit with semiflexo trolley . Primer Gravure unit is equippe d with double hood eac 3 mt length 18 blowing air slots, 2 blowing fabns , one exhaust fan , two gas burners and automatic recirculation unoit and NIRA LEL control
- pumping mixing unit
- Prmelting unot Nordson for Wax coating
- Coating rollers
- 6 anilox rollers and 40 sleeves for gravure coating nip roll
- Note
- Possible operation 1) Wax Coating laminating Paper - Alu foil or paper film and primer in line 2) Wax paper coating one side or doiuble side 3) Hot melt coating 4) Water based lamination wet bond paper -Alu foil with semiflexo trolley and primer in line
| Machine Code | LA356 |
| Manufacturer | MB |
| Modello | HOT MELT, WAX COATER LAMINATOR |
| Year | 2002 |
| Application | Lamination + coating |
| Type of lamination/coating | HOT MELT |
| Working width (mm) | 1700 |
| Materials | Paper and board, Film and Alu foil ( secondary unwi) |
| Speed | 400 mpm |
| First unwinder type | Single position shaftless double brake for paper and board |
| Max diameter reel unwinder | 1900 |
| Secondary unwinder type | Single position shaftles for film and Al foil |
| Max diameter reel unwinder | 1000 |
| Rewinder type | Surface driven shaftless |
| Max diameter reel rewinder | 1900 |
| Coating unit | Trolley based with Wax - Hot melt trolley and Semi flexo trolley |
| Second Coating unitr | Gravure for Primer coating |
| Drying | 3 meter tunnel with one blowing and one exhaus fan and one gas burner for lamination unit with semiflexo trolley . Primer Gravure unit is equippe d with double hood eac 3 mt length 18 blowing air slots, 2 blowing fabns , one exhaust fan , two gas burners and automatic recirculation unoit and NIRA LEL control |
| pumping mixing unit | Prmelting unot Nordson for Wax coating |
| Coating rollers | 6 anilox rollers and 40 sleeves for gravure coating nip roll |
| Note | Possible operation 1) Wax Coating laminating Paper - Alu foil or paper film and primer in line 2) Wax paper coating one side or doiuble side 3) Hot melt coating 4) Water based lamination wet bond paper -Alu foil with semiflexo trolley and primer in line |
BIELLONI CLEO
-
Machine Code: LA346
-
Year: 1998
-
Working width (mm): 1200
NORDMECCANICA SUPER COMBI 2000
-
Machine Code: LA307
-
Year: 2002
-
Working width (mm): 1320
SCHIAVI ECOFLEX
-
Machine Code: LA394
-
Year: 2001
-
Working width (mm): 1350
NORDMECCANICA DUPLEX SL 450
-
Machine Code: LA429
-
Year: 2017
-
Working width (mm): 1100
Bubani Adhesive tape solvent base
-
Machine Code: LA312
-
Year: 1990
-
Working width (mm): 1350
KBA FLEXOTECNICA EVO LAM
-
Machine Code: LA416
-
Year: 2020
-
Working width (mm): 1300