Biaxially oriented polypropylene (BOPP) and Biaxially oriented polyester (BOPET) are commonly produced in tender-frame lines. In these lines material is melted through a flat extrusion die (T-die) and solidified onto a cooled roller. Material is then stretched in machine direction in an MDO. Thereafter material is stretched in transversal direction in a TDO. These processes deliver a molecule orientation in both axes, this enhances many of their properties, particularly the mechanical, impact, barrier and optical properties.
Ask more informations
- Machine Code
- BO84
- Manufacturer
- BRUCKNER
- Year
- 1989
- Number of layers
- 3
- Material
- BOPP
- Output
- 1,450 kgs/h
- Width (mm)
- 6200
- Extruder 1 Description
- Cascade type. Output 1,450 kg/h, screw diam 150mm L/D 20 (Melt) +200 mm L/D 20 (Metering)
- Extruder 2 Description
- Output 280 kg/h,screw diam 110mm L/D29
- Extruder 3 Description
- Output 140 kg/h, screw diam 60mm L/D32
- Die width
- 883 mm
- Chill roll unit
- Chill roll in water bath, Air knife, film and chill roll drying system, water bath
- MDO description
- 10 pre-heating rolls-oil heating ; 6 stretching rolls ; 2 annealing rolls-oil heating ; 5 nip rolls; stretching ratio 1:1-1:8 ; Aux, winder.
- TDO description
- Chain and chain track system F.O.K 4.4.2 ; Heating system: circulating air vai individual heating system/zone (steam heating, motors, fans, sensors, etc); Edge guide system at inlet.
- Corona treatment
- 3 corona treatment stations 1 up and 2 down - Double treated
- Pull roll unit
- Chromed Rolls chilled by water ; Edge trim on-line recycling unit; Thickness Gauge (film)
- Rewinder width
- 6400 mm
- Slitter
- GOEBEL INTERSLIT 6500, year 2016. Material BOPP 10-80um, Max.Webwidth - 6200mm, UnwinderDia - 1300mm, Max. rewind dia - 1250mm, grooved roller pitch of 5:5, 1.5mm groove, 3.5mm tie, depth 3mm, slittingwidth(min-max) 270-2500mm,Max. finished roll weight - 2000kg, No. of rewind stations: 12 pcs, Machine speed - 800 m/min,Trim Winder - width: 30-150mm, dia: 450-1200mm.
- Note
- PLC and Drive upgraded
| Machine Code | BO84 |
| Manufacturer | BRUCKNER |
| Year | 1989 |
| Number of layers | 3 |
| Material | BOPP |
| Output | 1,450 kgs/h |
| Width (mm) | 6200 |
| Extruder 1 Description | Cascade type. Output 1,450 kg/h, screw diam 150mm L/D 20 (Melt) +200 mm L/D 20 (Metering) |
| Extruder 2 Description | Output 280 kg/h,screw diam 110mm L/D29 |
| Extruder 3 Description | Output 140 kg/h, screw diam 60mm L/D32 |
| Die width | 883 mm |
| Chill roll unit | Chill roll in water bath, Air knife, film and chill roll drying system, water bath |
| MDO description | 10 pre-heating rolls-oil heating ; 6 stretching rolls ; 2 annealing rolls-oil heating ; 5 nip rolls; stretching ratio 1:1-1:8 ; Aux, winder. |
| TDO description | Chain and chain track system F.O.K 4.4.2 ; Heating system: circulating air vai individual heating system/zone (steam heating, motors, fans, sensors, etc); Edge guide system at inlet. |
| Corona treatment | 3 corona treatment stations 1 up and 2 down - Double treated |
| Pull roll unit | Chromed Rolls chilled by water ; Edge trim on-line recycling unit; Thickness Gauge (film) |
| Rewinder width | 6400 mm |
| Slitter | GOEBEL INTERSLIT 6500, year 2016. Material BOPP 10-80um, Max.Webwidth - 6200mm, UnwinderDia - 1300mm, Max. rewind dia - 1250mm, grooved roller pitch of 5:5, 1.5mm groove, 3.5mm tie, depth 3mm, slittingwidth(min-max) 270-2500mm,Max. finished roll weight - 2000kg, No. of rewind stations: 12 pcs, Machine speed - 800 m/min,Trim Winder - width: 30-150mm, dia: 450-1200mm. |
| Note | PLC and Drive upgraded |
WINDMÖLLER & HÖLSCHER W&H + Brückner CAST COEX TD3000
-
Machine Code: BO79
-
Year: 2002
-
Width (mm): 2800
DMT TDO unit for PVC shrink labels
-
Machine Code: BO68
-
Year: 2004
-
Width (mm): 2500
