BOBST ROTOMEC 4003 MP 1200/350/C Rotogravure press 8 colors // Rotogravure // Printing machines // Used Flexo Press // Tecno Converting 2000 S.r.l.

** SOLD **

Rotogravure presses allow high and stable print quality. Recent technical improvements also allowed to reduce set up times.

Photo Gallery

Ask more informations

about a similar one

Machine Code: RO190
Manufacturer: BOBST ROTOMEC
Modello: 4003 MP 1200/350/C
Year: 2013
Number of colors: 8
Drive: Electronic shaft
Trolley system: Yes
Web width (mm): 1250
Print width (mm): 1225
Print repeat range (mm): 450-920 mm
Drying specifications: Inblow and outblow fans are under Inverter control, Vendilation hood mod V2200, 2,2 m length, qty nozels 10, air flow per each hood 80/m3/min, air speed at nozels 35m/s,; opening book type for easy access
Drying heat surce: Thermal Oil (temp >230C), 8 heaters, Installed thermal power per each heater 73.000 Kcal
Unwinder type: Turret both direction splicing, electronic web breack detector, 76 and 152 shafts
Max reel diameter unwinder (mm): 1020
Rewinder type: Turret both direction splicing, electronic web breack detector, 76 and 152 shafts
Max reel diameter rewinder (mm): 1020
Videocamera: BST, model Super Handy Scan 4000
Register controll: Automati register control make Bobst, model Registron S5100-E4. 2 scanning heads for Front-to-Back register + 1 scanning head for each controlled unit,
Vyscosity control: ROTOMEC ISOFLOW SYSTEM Rotomec patented. Auto vyscisity and auto
Corona treatment: Yes, ceramic type to treat alternatively both sides of the web
Note: MATERIALS TO BE HANDLED : - BOPP -PET -BOPA LDPE suitable for printing min. 35 my max.100 my . Cellophane min. 28 g/m2 max 60 g/m2 . Paper and laminates min. max 150 g/m2 Other suitable materials, as a function of the foreseen web tension range DETECTING/CONTROL OF SOLVENT CONCENTRATION LEVEL (LEL) from Rotomec, model: infrared , 8 taking-off points PRE-REGISTER EQUIPMENT: On a first time job pre-register will be obtained by performing a printing pass corresponding at one machine length at minimum speed. On a repeated Job it is fully automatic and from start. Turning bar Electrostatic assistance system ACE 8 anti static bars Thermo oil heater included Water chiller included Compressor for sleeve change included 6b spare trolleys Cosmo line pro Automation AC Inverters and vectro motros : SIEMENS AC Inverters and motors : SIEMENS/ABB PLC: SIEMENS S7 Linf for remote service Web direction: from left to right from operator side

Machine Code	RO190
Manufacturer	BOBST ROTOMEC
Modello	4003 MP 1200/350/C
Year	2013
Number of colors	8
Drive	Electronic shaft
Trolley system	Yes
Web width (mm)	1250
Print width (mm)	1225
Print repeat range (mm)	450-920 mm
Drying specifications	Inblow and outblow fans are under Inverter control, Vendilation hood mod V2200, 2,2 m length, qty nozels 10, air flow per each hood 80/m3/min, air speed at nozels 35m/s,; opening book type for easy access
Drying heat surce	Thermal Oil (temp >230C), 8 heaters, Installed thermal power per each heater 73.000 Kcal
Unwinder type	Turret both direction splicing, electronic web breack detector, 76 and 152 shafts
Max reel diameter unwinder (mm)	1020
Rewinder type	Turret both direction splicing, electronic web breack detector, 76 and 152 shafts
Max reel diameter rewinder (mm)	1020
Videocamera	BST, model Super Handy Scan 4000
Register controll	Automati register control make Bobst, model Registron S5100-E4. 2 scanning heads for Front-to-Back register + 1 scanning head for each controlled unit,
Vyscosity control	ROTOMEC ISOFLOW SYSTEM Rotomec patented. Auto vyscisity and auto
Corona treatment	Yes, ceramic type to treat alternatively both sides of the web
Note	MATERIALS TO BE HANDLED : - BOPP -PET -BOPA LDPE suitable for printing min. 35 my max.100 my . Cellophane min. 28 g/m2 max 60 g/m2 . Paper and laminates min. max 150 g/m2 Other suitable materials, as a function of the foreseen web tension range DETECTING/CONTROL OF SOLVENT CONCENTRATION LEVEL (LEL) from Rotomec, model: infrared , 8 taking-off points PRE-REGISTER EQUIPMENT: On a first time job pre-register will be obtained by performing a printing pass corresponding at one machine length at minimum speed. On a repeated Job it is fully automatic and from start. Turning bar Electrostatic assistance system ACE 8 anti static bars Thermo oil heater included Water chiller included Compressor for sleeve change included 6b spare trolleys Cosmo line pro Automation AC Inverters and vectro motros : SIEMENS AC Inverters and motors : SIEMENS/ABB PLC: SIEMENS S7 Linf for remote service Web direction: from left to right from operator side