- Maschinencode
- OT312
- Hersteller
- a
- Modello
- EMR 3005
- Baujahr
- 2022
- Machine Type
- ALUMINIUM LID PUNCHING + EMBOSSING MACHINE
- Note
- Description: Machine is equipped with below components : Foil embossing Frame unit Die cutting Frame unit Rexroth Electronic System SPS , AC and servo motors Electronic Sensors and backview camara system Touchscreen panel with manual switch for setting mode Remote Modem Service Control Panel Technical Data : Reel width max 650 mm , material to be punched 600 mm Reel diameter max. 1000 mm Materials :Alu Foil , Alu Foil Laminates, PET film,Paper and Paper Laminates Thickness : Aluminium Foil Thickness is 30-37 micron Available dies : 75 mm Strokes : 200 - 400 depending on the material and quality Output : 75.5 mm die will give 100.000 lids per hour 95.5 mm die will give 70.000 lids per hour
| Maschinencode | OT312 |
| Hersteller | a |
| Modello | EMR 3005 |
| Baujahr | 2022 |
| Machine Type | ALUMINIUM LID PUNCHING + EMBOSSING MACHINE |
| Note | Description: Machine is equipped with below components : Foil embossing Frame unit Die cutting Frame unit Rexroth Electronic System SPS , AC and servo motors Electronic Sensors and backview camara system Touchscreen panel with manual switch for setting mode Remote Modem Service Control Panel Technical Data : Reel width max 650 mm , material to be punched 600 mm Reel diameter max. 1000 mm Materials :Alu Foil , Alu Foil Laminates, PET film,Paper and Paper Laminates Thickness : Aluminium Foil Thickness is 30-37 micron Available dies : 75 mm Strokes : 200 - 400 depending on the material and quality Output : 75.5 mm die will give 100.000 lids per hour 95.5 mm die will give 70.000 lids per hour |
REMELLE DECKEL MASTER 320 PUNCHING MACHINE
-
Maschinencode: OT289
-
Baujahr: 2002
