- Machine code
- CA152
- Manufacturer
- PRIMPLAST
- Year
- 1999
- Number of layers
- 3
- Film structure
- ABC
- Material
- Stretch film LLDPE
- Film width (mm)
- 2000
- Speed (m/min)
- 550
- Extruder 1 Layer ref:
- A
- Screw diam 1
- 120mm
- Description 1
- 30D . AC motor 400Kw mounted in axis. Screw extractor. 1 cartridge filter .Doteco gravimetric dosing system
- Extruder 2 Layer ref:
- B
- Screw diam 2
- 120mm
- Description 2
- 30D . AC motor 200Kw.1 cartridge filter .Doteco gravimetric dosing system
- Extruder 3 Layer ref:
- C
- Screw diam 3
- 90mm
- Description 3
- 30D . AC motor 110Kw mounted in axis. 1 cartridge filter.Doteco gravimetric dosing system
- Die width (mm)
- 2480mm . Feedblock Cloeren. Flat die with 7+1 thermoregulating zones with 87 points for flexible lip regulation. Lip flex range 1mm. Fumes suction unit
- Chill roll unit
- max speed 550 m/min
- Rewinder max reel diameter (mm)
- 600mm
- Rewinder description
- Automatic winder mod. AVP 2.000-B .N 04+1 (spare) pneumatic shafts for cardboard cores int. diam. 76 mm with autocentering.Rolls unloading section — Automatic shafts loading/unloading.
- Note
- Inline scraps recovery extruder R120mm. Max suction speed 550m/min.AC motor 47 kw mounted in axis.Doteco gravimetric dosing system Set of pick-up manifolds and conveying pipes. Scraps grinder and air scraps separation unit with deadening jacket. Electro-aspirator unit with silencer and deadening box. Centrifugal separator for ground material. Electric fan for ground material conveyance. Deviating shutter for ground material discharge to the bags. 1 Air suction blade mod. PRIMPLAST (Vacuum box) • Plate steel body assembled on extrusion die. e Pipe set for blade/manifold connection. Motorized rear chamber adjustment Smoke collecting manifold with suction control shutter. N 0 2 electro-aspirator and connecting pipes to the manifold. N O 1 Single electroaspirator suitable for the suction on the extreme edge of the chambers. Edge keeping electrostatic device Positioning device with three axis adjustments Independent power supply with adjustment. X rays emission based thickness measurement system (SOTER]SCAN-TECH) Cooling System : Diam. 1.350 mm chill roll, equipped with a special water circulation system that guarantees a uniform surface temperature . Rubber coated roll with pneumatic control that allows the cleaning of the chill roll from extrusion fumes. Take-off complete with chromed/rubber coated roll 2 holders for thickness control unit. 1 a.c. motor reducer for chill roll driving. 1 a.c. motor reducer for take-off. Emergency push button set and accident prevention guards. Oscillating frame:2 aluminium rolls, one of which is treated. Max oscillation amplitude 100 mm on either sides.
| Machine code | CA152 |
| Manufacturer | PRIMPLAST |
| Year | 1999 |
| Number of layers | 3 |
| Film structure | ABC |
| Material | Stretch film LLDPE |
| Film width (mm) | 2000 |
| Speed (m/min) | 550 |
| Extruder 1 Layer ref: | A |
| Screw diam 1 | 120mm |
| Description 1 | 30D . AC motor 400Kw mounted in axis. Screw extractor. 1 cartridge filter .Doteco gravimetric dosing system |
| Extruder 2 Layer ref: | B |
| Screw diam 2 | 120mm |
| Description 2 | 30D . AC motor 200Kw.1 cartridge filter .Doteco gravimetric dosing system |
| Extruder 3 Layer ref: | C |
| Screw diam 3 | 90mm |
| Description 3 | 30D . AC motor 110Kw mounted in axis. 1 cartridge filter.Doteco gravimetric dosing system |
| Die width (mm) | 2480mm . Feedblock Cloeren. Flat die with 7+1 thermoregulating zones with 87 points for flexible lip regulation. Lip flex range 1mm. Fumes suction unit |
| Chill roll unit | max speed 550 m/min |
| Rewinder max reel diameter (mm) | 600mm |
| Rewinder description | Automatic winder mod. AVP 2.000-B .N 04+1 (spare) pneumatic shafts for cardboard cores int. diam. 76 mm with autocentering.Rolls unloading section — Automatic shafts loading/unloading. |
| Note | Inline scraps recovery extruder R120mm. Max suction speed 550m/min.AC motor 47 kw mounted in axis.Doteco gravimetric dosing system Set of pick-up manifolds and conveying pipes. Scraps grinder and air scraps separation unit with deadening jacket. Electro-aspirator unit with silencer and deadening box. Centrifugal separator for ground material. Electric fan for ground material conveyance. Deviating shutter for ground material discharge to the bags. 1 Air suction blade mod. PRIMPLAST (Vacuum box) • Plate steel body assembled on extrusion die. e Pipe set for blade/manifold connection. Motorized rear chamber adjustment Smoke collecting manifold with suction control shutter. N 0 2 electro-aspirator and connecting pipes to the manifold. N O 1 Single electroaspirator suitable for the suction on the extreme edge of the chambers. Edge keeping electrostatic device Positioning device with three axis adjustments Independent power supply with adjustment. X rays emission based thickness measurement system (SOTER]SCAN-TECH) Cooling System : Diam. 1.350 mm chill roll, equipped with a special water circulation system that guarantees a uniform surface temperature . Rubber coated roll with pneumatic control that allows the cleaning of the chill roll from extrusion fumes. Take-off complete with chromed/rubber coated roll 2 holders for thickness control unit. 1 a.c. motor reducer for chill roll driving. 1 a.c. motor reducer for take-off. Emergency push button set and accident prevention guards. Oscillating frame:2 aluminium rolls, one of which is treated. Max oscillation amplitude 100 mm on either sides. |
ADTECH PROVERA HR 1000/3
-
Machine code: CA206
-
Year: 2005
-
Film width (mm): 1000
ADTECH PROVERA
-
Machine code: CA132
-
Year: 2009
-
Film width (mm): 2000
WINDMÖLLER & HÖLSCHER FILMEX
-
Machine code: CA246
-
Year: 2015
-
Film width (mm): 2700
MACCHI
-
Machine code: CA171
-
Year: 2012
-
Film width (mm): 2000
COLINES POLYCAST CFC/210
-
Machine code: CA243
-
Year: 2014
-
Film width (mm): 2100
REIFENHAUSER
-
Machine code: CA234
-
Year: 1998
-
Film width (mm): 3000