- Codice Macchina
- SR559
- Manufacturer
- LAEM SYSTEM
- Modello
- DOCTORING MACHINE VIS100-800
- Year
- 2015
- Larghezza lavoro (mm)
- 800
- Materiali
- APET/PE materials .Thickness range to be considered is 50 – 600 µm
- Velocità
- 600m/min
- Diametro massimo bobina svolgitore
- 800
- Rewinder type
- Center driven with independent arms
- Diametro massimo bobina avvolgitore
- 1000
- Ulteriori informazioni
- The VIS Machine is designed to correct alignment errors and to remove defective spans from finished reels of APET sheet. The machine is bidirectional, allowing the web to run through the machine in either direction: during first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with help of splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. Splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. Unwind & Rewind Tension range:25-250 N Maximum outer diameter unwinding/rewinding:1000 mm Taper Tension:From 100% to 50% of the set tension Web direction:Bidirectional Electric power supply, drive:CA 400V – 50HZ Electronic power supply, service voltage:12 kW Electronic components:Siemens Min. Pressure of compressed air supply:6 bar Consumption of compressed air, humidity free:70 l/hr Noise level Lp(A):< 80 Db(A) Rewinding parametres : Maximum jumbo roll width:800 mm Width of rollers / draw roller:900 mm Maximum jumbo roll diameter:1000 mm Unwinding and Rewinding Shafts:Two 3” + two 6” shafts Maximum jumbo roll weight:800 kg Type of cores:Good quality cardboard Web guide stroke :± 50 mm Rewinding method :Central drive, with rubberized lay-on roller across the full nominal width
| Codice Macchina | SR559 |
| Manufacturer | LAEM SYSTEM |
| Modello | DOCTORING MACHINE VIS100-800 |
| Year | 2015 |
| Larghezza lavoro (mm) | 800 |
| Materiali | APET/PE materials .Thickness range to be considered is 50 – 600 µm |
| Velocità | 600m/min |
| Diametro massimo bobina svolgitore | 800 |
| Rewinder type | Center driven with independent arms |
| Diametro massimo bobina avvolgitore | 1000 |
| Ulteriori informazioni | The VIS Machine is designed to correct alignment errors and to remove defective spans from finished reels of APET sheet. The machine is bidirectional, allowing the web to run through the machine in either direction: during first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with help of splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. Splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. Unwind & Rewind Tension range:25-250 N Maximum outer diameter unwinding/rewinding:1000 mm Taper Tension:From 100% to 50% of the set tension Web direction:Bidirectional Electric power supply, drive:CA 400V – 50HZ Electronic power supply, service voltage:12 kW Electronic components:Siemens Min. Pressure of compressed air supply:6 bar Consumption of compressed air, humidity free:70 l/hr Noise level Lp(A):< 80 Db(A) Rewinding parametres : Maximum jumbo roll width:800 mm Width of rollers / draw roller:900 mm Maximum jumbo roll diameter:1000 mm Unwinding and Rewinding Shafts:Two 3” + two 6” shafts Maximum jumbo roll weight:800 kg Type of cores:Good quality cardboard Web guide stroke :± 50 mm Rewinding method :Central drive, with rubberized lay-on roller across the full nominal width |
EUROMAC SV.I. 10M+TB-520
-
Codice Macchina: SR429
-
Year: 1993
-
Larghezza lavoro (mm): 1300
JAGENBERG Varidur 33/18
-
Codice Macchina: SR590
-
Year: 1978
-
Larghezza lavoro (mm): 2600
WICKELTECHNIK SBU 100.110
-
Codice Macchina: SR519
-
Year: 1991
-
Larghezza lavoro (mm): 1100
SAGE 1996
-
Codice Macchina: SR555
-
Year: 1996
-
Larghezza lavoro (mm): 1800
GOEBEL Mono slit
-
Codice Macchina: SR581
-
Year: 1993
-
Larghezza lavoro (mm): 4200
SUTTONG
-
Codice Macchina: SR500
-
Year: 2003
-
Larghezza lavoro (mm): 2300