11 capas WINDMÖLLER & HÖLSCHER FILMEX Extrusora de film // Cast film // Film extrusion lines // Máquinas usado flexográficas y máquinas del converting // Tecno Converting 2000 S.r.l.

Código Máquina: CA246
Constructor: WINDMÖLLER & HÖLSCHER
Modello: FILMEX
Año: 2015
Number of layers: 11
Film structure: GAAJCEDIFHB; IGEAAAAAEHJ
Material: CPP and Barrier Film
Film width (mm): 2700
Speed (m/min): 350
Output (Kg/h): 1500, depending on materials
Extruder 1 Layer ref:: A
Screw diam 1: 120mm L/D30
Description 1: Gravimetric doser Modul G3, AC motor 265kW, screw rpm 200/min, heating cap 50kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer,
Extruder 2 Layer ref:: B
Screw diam 2: 90mm L/D 30
Description 2: Gravimetric doser Modul G3, AC motor 125kW, screw rpm 250/min, heating cap 30kW, bi-metallic barrel, 4 zone heating, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 3 Layer ref:: C, D, E
Screw diam 3: 70mm L/D30
Description 3: Gravimetric doser Modul G3, AC motor 89kW, screw rpm 310/min, heating cap 18kW, bi-metallic barrel, 4 zone heating, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 4 Layer ref:: F
Screw diam 4: 70mm L/D30
Description 4: Gravimetric doser Modul G3, AC motor 89kW, screw rpm 310/min, heating cap 18kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, 4 zone heating, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 5 Layer ref:: G, H, I, J
Screw diam 5: 60mm L/D30
Description 5: Gravimetric doser Modul G3, AC motor 60kW, screw rpm 350/min, heating cap 14.4kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. Screw's flights coated with low wear armour, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 6 Layer ref:: Extruder feeding edge encapsualtion system
Screw diam 6: 60mm L/D30
Description 6: Gravimetric doser Modul G3, AC motor 60kW, screw rpm 350/min, heating cap 14.4kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. Screw's flights coated with low wear armour, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Head description: Make: CLOREN, 11 layers + encapsulation, CONTRAC heating system,10 infeed melt pipes+ 1 for encapsulation, available with 2 feedblock cassettes, Automatic extrusion die, encapsulation deckle system fo edges width adjustments in 500mm per side, die lip heating (for PA or PET), hydraulic die opener,
Die width (mm): 3000
Chill roll unit: First chill roll 1000mm diam, second 400mm diam, hard chroe poliched surface, double walled design with double spiral forced feed of cooling fluid, torque direct drive motors, motor adjustable air knife, Inverter controlled blower. Both electrostatic and pneumatic edge pinning systems.Plate out rubber roller. 3 circuit temperature control unit, water cooling with a max temperature of 90C
Thickness controll system: 2 thickness gauges, beta ray with KR85 emitter. Possibility to read separately Poleolefines (PP/PE), PA, EVOH
Corona treatment: Effective width 2850mm, generator output 30kW, surface tension nominal 44-46 dyne/cm, process roller, silicon surface with water cooling, driven mollers, Ozone extractore,
Web guide: Oscillating frame
Rewinder max reel diameter (mm): 1090
Rewinder description: 2x driven chill rollers between before infeed to winder, FILMATIC TC, automatic turret winder, width 3000mm, center winding drive with winding in contact or gap, flying knife cut in reel change, tapeless reel start system, possible reverse winding, In line "bleedless" slitting with 2 driven banana rollers, trim take away roller 2 "soft touch" sponge lay on rollers. 3 windinf shafts 152mm core diam. Automatic reel un loading and shaft extractor
Note: web tension 30-500 N Edge trim assembly with 75mm trimming width per side. Edge trim re-feeding system with pneumatic felivery, shredder and dedicated extruder. UPS

Código Máquina	CA246
Constructor	WINDMÖLLER & HÖLSCHER
Modello	FILMEX
Año	2015
Number of layers	11
Film structure	GAAJCEDIFHB; IGEAAAAAEHJ
Material	CPP and Barrier Film
Film width (mm)	2700
Speed (m/min)	350
Output (Kg/h)	1500, depending on materials
Extruder 1 Layer ref:	A
Screw diam 1	120mm L/D30
Description 1	Gravimetric doser Modul G3, AC motor 265kW, screw rpm 200/min, heating cap 50kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer,
Extruder 2 Layer ref:	B
Screw diam 2	90mm L/D 30
Description 2	Gravimetric doser Modul G3, AC motor 125kW, screw rpm 250/min, heating cap 30kW, bi-metallic barrel, 4 zone heating, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 3 Layer ref:	C, D, E
Screw diam 3	70mm L/D30
Description 3	Gravimetric doser Modul G3, AC motor 89kW, screw rpm 310/min, heating cap 18kW, bi-metallic barrel, 4 zone heating, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 4 Layer ref:	F
Screw diam 4	70mm L/D30
Description 4	Gravimetric doser Modul G3, AC motor 89kW, screw rpm 310/min, heating cap 18kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, 4 zone heating, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. TUNGSTEN CARBIDE hardened screw, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 5 Layer ref:	G, H, I, J
Screw diam 5	60mm L/D30
Description 5	Gravimetric doser Modul G3, AC motor 60kW, screw rpm 350/min, heating cap 14.4kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. Screw's flights coated with low wear armour, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Extruder 6 Layer ref:	Extruder feeding edge encapsualtion system
Screw diam 6	60mm L/D30
Description 6	Gravimetric doser Modul G3, AC motor 60kW, screw rpm 350/min, heating cap 14.4kW, bi-metallic barrel, CONTRAC SSR (Solid state relais) heating circuit, SMB (smooth barrier design) , forces feed spiral mandrel shearing section and cross hole mixing sect. Screw's flights coated with low wear armour, water cooling for in-feed section, drawer magnet, Hydraulic screen changer, water thermo regulation unit (3.KW heating 23 KW cooling)
Head description	Make: CLOREN, 11 layers + encapsulation, CONTRAC heating system,10 infeed melt pipes+ 1 for encapsulation, available with 2 feedblock cassettes, Automatic extrusion die, encapsulation deckle system fo edges width adjustments in 500mm per side, die lip heating (for PA or PET), hydraulic die opener,
Die width (mm)	3000
Chill roll unit	First chill roll 1000mm diam, second 400mm diam, hard chroe poliched surface, double walled design with double spiral forced feed of cooling fluid, torque direct drive motors, motor adjustable air knife, Inverter controlled blower. Both electrostatic and pneumatic edge pinning systems.Plate out rubber roller. 3 circuit temperature control unit, water cooling with a max temperature of 90C
Thickness controll system	2 thickness gauges, beta ray with KR85 emitter. Possibility to read separately Poleolefines (PP/PE), PA, EVOH
Corona treatment	Effective width 2850mm, generator output 30kW, surface tension nominal 44-46 dyne/cm, process roller, silicon surface with water cooling, driven mollers, Ozone extractore,
Web guide	Oscillating frame
Rewinder max reel diameter (mm)	1090
Rewinder description	2x driven chill rollers between before infeed to winder, FILMATIC TC, automatic turret winder, width 3000mm, center winding drive with winding in contact or gap, flying knife cut in reel change, tapeless reel start system, possible reverse winding, In line "bleedless" slitting with 2 driven banana rollers, trim take away roller 2 "soft touch" sponge lay on rollers. 3 windinf shafts 152mm core diam. Automatic reel un loading and shaft extractor
Note	web tension 30-500 N Edge trim assembly with 75mm trimming width per side. Edge trim re-feeding system with pneumatic felivery, shredder and dedicated extruder. UPS

Atrás

COLINES ALLROLL EX 1500

Film extrusion lines
Cast film
Código Máquina: CA256
Año: 2018
Film width (mm): 1500

ADTECH PROVERA HR 1000/3

Film extrusion lines
Cast film
Código Máquina: CA206
Año: 2005
Film width (mm): 1000

ADTECH PROVERA

Film extrusion lines
Cast film
Código Máquina: CA205
Año: 2003
Film width (mm): 1500

JWELL ACS 510

Film extrusion lines
Cast film
Código Máquina: CA257
Año: 2021
Film width (mm): 900

MACCHI

Film extrusion lines
Cast film
Código Máquina: CA235
Año: 1999
Film width (mm): 1500

ADTECH PROVERA HWR 1000/3

Film extrusion lines
Cast film
Código Máquina: CA207
Año: 2008
Film width (mm): 1000

Machine's Remote Visit

Are you interested to Machine's Remote Visit?
Please click here.

Contactos

Para otras informaciones, llene el formulario y sus campos obligatorios. Usted será contactado por nosotros lo antes posible.

Sociedad *

Nombre y apellido *

Email *

Country *

Country code *

Teléfono *

Tipo de máquina

Especificaciones

Informaciones adicionales

INFORMACIÓN - Contactos

Sus datos serán tratados de conformidad con la normativa vigente solamente por funcionarios autorizados, sólo para dar curso al envío de información o material solicitado. La concesión de los datos es esencial en relación con la finalidad expuesta; los datos que faltan harán imposible contactar con usted y satisfacer sus peticiones. El responsable de los datos es Tecno Converting 2000 S.r.l. situado en Via A. Dominutti, 6 37135 (VR) Italy. Sus datos no serán comunicados o difundidos a terceros. Puede ponerse en contacto con el "Servicio de Privacy " en la parte Controller de datos para ejercer todos los derechos previstos y para obtener la información completa, puede descargarlo en la página de la privacy adecuada de este sitio.

He leído las informaciones y acepto

No acepto